It is used for preparing and processing the raw materials before the pellet production. Moreover, you can control the amount of steam and oil added to the raw materials, and also the residence time. All the parts that are in direct contact with the raw materials are made of stainless steel. This device is designed in various capacities and three types including one, two or three levels.
Note: the heating system would be added to the body upon request.
- Very good absorption of the steam and oil by the raw materials
- A uniform mixing of the raw materials and steam
- Sturdy body construction
- Easy to clean
- Long maintenance intervals
- Simple design
- Rare accumulation and clogging in the device
- Reduction in bacteria growth
- Capacity: 12 - 30 tons per hour
- Power transmission by the belts
- Equipped with inspection valve to observe inside of the machine
- Equipped with temperature sensor
- Easy to replace and Adjust the height and paddles
- Shaft rotational speed: 300 rpm
- Designed in one, two, or three levels
| Type | Number of Floors | Capacity | Dimensions(mm) | ||||
|---|---|---|---|---|---|---|---|
| A | B | C | D | E | |||
| 450*1700 | 1 | 12 | 1000 | 690 | 2020 | 725 | 1437 |
| 450*2000 | 1 | 15 | 1000 | 690 | 2320 | 720 | 1737 |
| 500*2500 | 1 | 20 | 1097 | 715 | 2844 | 802 | 2191 |
| 500*3000 | 1 | 25 | 1062 | 715 | 3316 | 767 | 2691 |
| 700*3000 | 1 | 30 | 1130 | 980 | 3390 | 875 | 2670 |
| 450*2000 | 2 | 30 | 1040 | 1300 | 2359 | 770 | - |
| 500*2500 | 2 | 40 | 1065 | 1325 | 2914 | 770 | - |